Apply Today

Heavy Equipment Operations

49.0202

(One-Year Certificate)

The Heavy Equipment Operations program is designed to produce operators trained in the major classification of earth moving equipment. The program starts in the summer and runs for eleven months. Students receive extensive training in the operation of dozers, scrapers, wheel loaders, backhoes, excavators, graders, and skid steers. Classroom instruction includes units in a number of related subjects such as welding, grade operations, blueprint reading and preventive maintenance (fuel and lubricants). The Heavy Equipment Operations program is accredited by the National Center for Construction Education and Research (NCCER).

The college works with local agencies, high schools, and colleges in providing practical on-the-job experience when possible. Training, which begins in June, takes place on a 125-acre operation site. Graduates of the one-year (11 month) certificate program can expect to find entry-level employment in the following fields: county, state, and interstate highway construction, levee construction, agricultural construction, airport development, and commercial and residential construction. The total instructional hours of the certificate program are 1,350 hours of which 160 hours of instruction are in Class A Commercial Driver’s License (CDL).

The applied curriculum is performed on both simulated and actual construction projects. The student will perform manual labor usually associated with these tasks (such as bolting pipe, shoveling, etc.). A course that prepares students for the Class A Commercial Driver’s License (CDL) examination is included in the program. In order to enroll or continue in the Heavy Equipment Operations program students must be eligible to take the Class A Commercial Driver’s License (CDL) examination and maintain eligibility until a Class A Commercial Driver’s License (CDL) is obtained. If the student becomes ineligible to take the Class A Commercial Driver’s License (CDL) examination or loses their Class A Commercial Driver’s License (CDL) the student will not continue in the Heavy Equipment Operations program. As in industry, students will be required to pass random drug tests to enter and remain enrolled in this program.

The Heavy Equipment Operations (HEO) program contributes to the green economy by burning the college’s used motor oil in a Department of Natural Resources (DNR) permitted furnace to heat the HEO building. The HEO department also recycles approximately ten tons of scrap iron annually from used undercarriages, bearings, and other equipment parts. The department recently converted all of its module exams to use Scantron cards to reduce the use of paper.

Enrollment in the Heavy Equipment Operations program is limited and students are selected for this program on a competitive basis. Contact the Office of Admissions for the specific application requirements and deadline.

Students will complete an internship once they have earned a grade of “C” or better in all “Core Curriculum” and “Program Requirement” courses and a grade of “D” or better in all General Education Requirement courses, pass the exit exam, and obtain the approval of their advisor.  Students on internships are temporary employees of the company where they receive training.  They are supervised by both their employers and by representatives of the college.  In addition to the random drug testing described above, internship employers may also require drug testing.  Students who do not pass a drug test during their internship will not continue in the Heavy Equipment Operations program.

It is a graduation requirement of the Heavy Equipment Operations (HEO) one-year certificate for students to earn a grade of “C” or better in all “Core Curriculum” and “Program Requirement” courses; due to state licensing requirements, students must earn a grade of “B” or better in the CDL class.

Program Mission
The mission of the Heavy Equipment Operations program is to provide the opportunity for students to develop the technical and interpersonal skills required to be successful in the horizontal construction industry.

Program Goals
The goals of the program are to:

  • Assure that procedures related to the operation of heavy equipment are followed in accordance with industry standards.
  • Provide students with the technical competencies in the major classifications of earth moving equipment utilized at the college.
  • Provide the students the opportunity to develop effective communication skills necessary to succeed in the industry.

Program Assessments

  • MoDOT Commercial’s Drivers License (CDL)
  • National Center for Construction Education and Research (NCCER)
CORE CURRICULUM

Credit Hours

HEO

100

First Aid and Safety

1

HEO

102

Basics of Heavy Equipment Operation

1

HEO

105

Orientation to the Trade

1

HEO

106

Introduction to Heavy Equipment Operations

1

HEO
108
Introduction to OSHA Regulations
1

HEO

112

Applied Measurements In Construction

2

HEO
121
Environmental Compliance
1

HEO

131

Heavy Equipment Operations Internship

3

HEO
134
Safety and Loss Control
3
HEO
138
Advanced Operating Techniques
1

HEO

139

Grade Operations

2

HEO

146

Backhoe and Excavator

4

HEO

147

Dozer and Scraper

4

HEO

148

Loader

4

HEO

149

Motor Grader and Skid Steer

4

HEO

150

Commercial Driver’s License

4

 

 

SUB-TOTAL

37

       
PROGRAM REQUIREMENT
WLT
118 HEO Welding

1

 

 

SUB-TOTAL

1

 

 

 

 

GENERAL EDUCATION REQUIREMENTS  
Must include: Three credit hours for Area 1. Oral & Written Communications
3
AND      
Three credit hours from Area 5. Technical Literacy

3

    Sub Total

6

     

 

GRADUATION REQUIREMENT

COM

125

Job Search Strategies

1

 

 

SUB-TOTAL

1

 

 

It is a graduation requirement of the Heavy Equipment Operations (HEO) one-year certificate for students to earn a grade of “C” or better in all “Core Curriculum” and “Program Requirement” courses; due to state licensing requirements, students must earn a grade of “B” or better in the CDL class.
     
    PROGRAM TOTAL

45


HEO 100  First Aid and Safety.  This course is designed to introduce students to the possible safety hazards associated with working around heavy equipment.  Students will become familiar with procedures sanctioned by the American Red Cross and receive training in the identification of emergency situations and safe performance of common construction applications.  1 credit hour.

HEO 102  Basics of Heavy Equipment Operation.  This course is designed to give the student a basic understanding of basic tools and blueprints used in the construction trade.  1 credit hour.

HEO 105  Orientation to the Trade.  This course introduces the Heavy Equipment Operations student to the different aspects and requirements for the heavy equipment operations trade as well as educating the student in the proper care and preventive maintenance of construction equipment.  1 credit hour.

HEO 106  Introduction to Heavy Equipment Operations.  This course introduces the Heavy Equipment Operations student to the identification, use and description of basic operation of different types of heavy equipment including bulldozers, scrapers, excavators, and loaders.  Students are provided a broad introduction to the processes of planning and executing earth moving activities on various types of construction projects.  1 credit hour.

HEO 108  Introduction to OSHA Regulations.  This course provides the required industry training that meets the Occupational Safety & Health Administration (OSHA) 10 hour safety training regulation.  The areas of required studies are Introduction to OSHA, General Safety and Health, Personal Protective Equipment, Electrical Safety, Fall Protection, Cranes, Confined Space Entry, Excavations, Stairways and Ladders, Hand and Power Tools, and Motor Vehicles.  To complete this course and receive the OSHA 10 hour certification card, the student must pass the OSHA written exam.  1 credit hour.

HEO 112  Applied Measurement in Construction.  Practical mathematics taught with applications that apply to the horizontal construction industry.  Reading engineers scale, conversions of decimals, fractions and percents, and basic calculations for earth work quantities.  2 credit hours.

HEO 121  Environmental Compliance.  This course provides an introduction to the various federal and state laws which govern the construction industry, followed by more in-depth learning about the specific issues students are likely to encounter as heavy equipment operators.  Students will gain an awareness of topics ranging from solid and hazardous waste management, to water and air quality, to cultural resources, endangered species, and specifics of regulations related to demolition and earthmoving that are common to the industry.  1 credit hour.

HEO 131  Heavy Equipment Operations Internship.  The Heavy Equipment Operations Internship is comprised of on-the-job training provided by employers on actual construction sites.  A training agreement specifies the tasks the student will be expected to perform.  The instructor will determine the number of hours a student will participate in the internship.  Prerequisites:  Earn a grade of “C” or better in all “Core Curriculum” and “Program Requirement” courses, a grade of “D” or better in all General Education Requirement courses, pass the exit exam, and obtain the approval of their advisor.  3 credit hours.

HEO 134  Safety and Loss Control.  This course provides classroom instruction on the responsibilities of the finish operator and how these responsibilities affect financial losses due to safety and operation decisions.  The student is introduced to basic skills for the finish operator covering basic project planning and scheduling techniques as well as coordination and communication of work assignments to heavy equipment operators and other trades and crafts.  This course also describes project setup, materials purchasing, effects of soil testing, and primary safety programs.  Prerequisites:  HEO 100, HEO 102, HEO 105, and HEO 106 with a grade of “C” or better.  3 credit hours.

HEO 138  Advanced Operating Techniques.  This course teaches advanced topics for equipment operators including safety, controlling and working around water, calculating costs, and the effects of different soil types.  Prerequisite:  HEO 134 with a grade of “C” or better.  1 credit hour.

HEO 139  Grade Operations.  This course provides the student with details about the staking and grading operations of a construction projects.  It addresses staking requirements for roads, commercial buildings, and trenches.  Students are trained to read and interpret various plan sheets that contain grading information.  2 credit hours.

HEO 146  Backhoe and Excavator.  This course introduces basic identification of components, backhoe and excavator safety, use of operators manual, daily servicing and operation of the machine teaching students to start the machine, move it, and shut it down.  Included are basic backhoe and excavator operation and maintenance so that students will operate a backhoe and excavator to perform specific tasks.  4 credit hours.
 
HEO 147  Dozer and Scraper.  This course introduces basic dozer and scraper operation and maintenance, identification of components, dozer and scraper safety, use of operators manual, daily servicing and operation of the machine to the point where the student can safely start the machine, move it, and shut it down.  The student will operate both dozer and scraper to perform specific tasks.  4 credit hours.

HEO 148  Loader.  The student will be introduced to the practical operation of a front end loader to perform specific tasks, basic loader operation and maintenance.  Students will also be introduced to basic identification of components, front-end loader safety, use of operators manual, daily servicing and operation of the machine to the point where the students can start the machine, move it, and shut it down.  Operation of a front end loader to perform specific tasks will be taught.  4 credit hours.

HEO 149  Motor Grader and Skid Steer.  This course will introduce basic machine operation and maintenance including identification of components, safety, use of operators manuals, daily servicing and operation of the machine to the point where the student can start the machine, move it, and shut it down.  The student will also operate a motor grader and skid steer loader to perform specific tasks.  4 credit hours.

HEO 150  Commercial Driver License.  The Commercial Driver’s License (CDL) course is a professional course focused on the fundamentals of safe driving practices and identifying the hazards of a Class “A” Commercial Motor Vehicle (CMV).  The student will be able to inspect a commercial motor vehicle, perform basic maneuver skills, and display safe on-road skills on public streets and highways.  Prerequisite:  Instructor’s permission based on verification of:  1) driving record that is eligible for a Missouri Class A CDL, 2) complete, current, and valid Medical Examination Report and Certificate for Commercial Driver Fitness Determination, and 3) successful drug screen(s).  4 credit hours.

HEO 151  Basic Commercial Driver License.  This lecture course is a professional course that teaches the fundamentals of safe driving practices and identifying the hazards of a Class “A” Commercial Motor Vehicle.  Students are prepared to take the written and pre-trip inspection portions of the Missouri Department Motor Vehicle Commercial Driver License (CDL) exam.  This course is intended for non-HEO majors.  Prerequisite:  Instructor’s permission based on verification of:  1) driving record that is eligible for a Missouri Class A CDL, 2) complete, current, and valid Medical Examination Report and Certificate for Commercial Driver Fitness Determination, and 3) successful drug screen(s).  1 credit hour.

HEO 152  Basic Commercial Driver License Lab.  The Commercial Driver License (CDL) lab teaches Commercial Motor Vehicle (CMV) pre-trip inspection requirements, basic maneuver skills, safe on-road skills that are performed on public streets and highways.  This course is intended for non-HEO majors.  Corequisite:  HEO 151.  Note:  Each student will be required to have a Class A CDL permit for the driving portion of this class and maintain eligibility to take the Missouri Class A CDL examination.  1 credit hour.

HEO 299  Special Topics in Heavy Equipment Operations.  Special Topics in Heavy Equipment Operations (HEO) may include instruction on topics not covered in other HEO courses.  Topics covered in other HEO courses may also be covered in more depth in this special topics course.  Projects may be undertaken in any area related to the major program with credit hours determined by the level and amount of involvement.  The minimum involvement required for one credit is 30 contact hours.  The specific topic(s), objectives, plan of instruction, and evaluation criteria must be documented in the syllabus; approved by the Department/Division Chair; and filed in the Academic Records Office.  Students may complete more than one Special Topics course, provided that the credits earned in this manner do not exceed a total of four (4) credits.  1-4  credit hours.






Getting Started
Academic Programs
Transferring Credits
Electronic Brochure
College Prep
Admissions Requirements
How to Apply
Schedule Campus Tour
Schedule of Classes
College Catalogs
Student Handbook

Cost
Tuition and Fees
Scholarships
Financial Aid
Tuition Waivers
Net Price Calculator

Student Services
Academic Resource Center
Activity Center
Bookstore
Career Services
Counseling Center
Drug Screening
Library
Living On Campus
Student Life

Adult and Continuing Education and Customized Training Opportunities

 
Email the Webmaster View our Facebook page